Charging Dock¶
Required Tools¶
- Soldering iron
Bill of Materials¶
Qty | Description | Datasheet | Vendor |
---|---|---|---|
1 | Charging Dock PCB | OSH Park | |
1 | OLED display | Adafruit | |
1 | Microcontroller | ATMEGA328P-AU |
Octopart |
1 | 16 MHz Resonator | CSTLS16M0X53-A0 |
|
4 | Multiplexer | MAX4674 |
|
4 | 0805 Red LED | LTST-C171KRKT |
|
1 | Momentary Button | B3U-1100P |
|
4 | Female micro USB vertical socket | 1051330011 |
|
1 | Female micro USB horizontal socket | 10118193-0001LF |
|
4 | Lipo charger IC | MCP73831T |
|
1 | 0805 10 kΩ Resistor | ||
4 | 0805 27 kΩ Resistor | ||
8 | 0805 100 Ω Resistor | ||
9 | 0805 10 μF Capacitor |
Design Files¶
Code¶
Build Instructions¶
Uploading Firmware¶
Attention
If you have not yet setup the Arduino environment or the Cerebro Utility Shield, refer to Setting up Arduino IDE and/or Setting up Utility Shield before moving on.